16-Way Rackmount GPS splitter RGS116
Classification:
Product
GPS and GNSS Splitters
Product accessories:
- DESCRIPTION
- Videos
- Download
- BUY NOW
-
Description
The RGS116 GPS Splitter is a one-input, sixtheen-output GPS device. This product typically finds applicationwhere an input from an active GPS roof antenna is split evenly between thirty two receiving GPS units. In this scenariothe RGS132 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an activeGPS antenna on that port. Output ports(J2-J16) would feature a 200 Ohm DC load to simulate an antenna DC curentdraw for any receiver connected to those ports
The most common application is the input from an active GPS/GNSS roof antenna or GPS simulator is equally split to sixtheen two receivingg GPs units
The RCS116 wll support long-asting, trouble free deployment in a small cel wireless and/or CORS center stations. The device makes it possible touse a sindle GPSIGNSS referencing antenna for synchronization systems. increasing capacity without increasina GPS/GNSS antennas or cablinorequirements.
Technical Parameters
>Fu GNSS Band:GPS/GLONASS/Beidou/Galileo/IRNSS/QZSS/SBAS/NAVIC
>Frequency Range:1164~1616MHz;
>Gain(amplified):0dB ~ 30dB(Be specified)
>Pass DC to In Port(Standard).
>Block DC on In Port(Be Specified):
>DC Power Adaptor(Standard),
>High lsolation:>30dB
>DC Power Adaptor(Standard):
>High lsolation:>30dB.
>Low Noise Figure: <2.5dB
>Avaible In TNC, SMA, BNC and N ConnectorsSpecifications
Electrical Specifications, Operating Temperature -40 to 85C
Parameter Conditions Min Type Max Units Freq. Range Ant - Any Port 1164 1616 MHz In &Out Imped. In, all output ports 50 Ω Gain(2)
0dB In- Output ports, ,Unused Ports - 500 -1 0 1 dB 10dB 9 10 11 Input SWR All Ports- 50Ω 2.0:1 - Output SWR All Ports- 50Ω 2.0:1 - Nois Figure- Amplified Ant- Any Port, Unused Ports-500 3 dB Gain Flatness(Amplified) L1-L2,Ant- Any Port, Unused Ports-500 - 3 dB Amp. Balance J1-J2l. Ant- Any Port, Unused Ports-500 0.5 dB Phase Balance Phase(J1-J2) Ant- Any Port, Unused Ports-500 - 1.0 deg Group Delay Flatness 1 ns Isolation Amplified Adjacent Ports: In -50Ω 28 dB Opposite Ports: In - 50Ω 34 Gain:10dB Adjacent Ports: In - 50Ω 28 Opposite Ports: In - 50Ω 34 AC IN Wall Mount transformer 230 VAC DC IN DC Block Al1 ports with a 200Ω Load 14 VDC PASS DC.Amplified 3 16 PASS DC, Passive 16 Powered, to be specified Device Current 80 mA Current Pass DC, No Powered configuration, DC inputon J1 250 kA Powered, to be specified Max RF Input (Amplifed) Max RF input without damage 0 dBm Product details
GPS splitter
GNSS Repeater
GNSS Splitters
GPS Repeater
Previous Page
Previous Page
Professional consultant
We provide you with 1 on 1 exclusive services
Related products
Military Qualified GNSS Splitter GS112-55
32-Way Rackmount GPS Active Splitter RGS132