GPS/GNSS Satellite Signal Repeater Kit BGGRK

【Functional Description】

BGGRK is a repeater operates by receiving GPS/GLONASS/Beidou2 satellite signals with an antenna located outside the building and re‐radiating the signals into the indoor area or covered space where satellite signal cannot reach.

BGGRK is a single point GPS/GLONASS/Beidou2 repeater, one transmitting antenna transmit GPS/GLONASS signal. This solution offer adjustable test signal to receiver.
If need extend the system, you can add assemblies and sending antennas, so as to cover satellite signal indoor large area and more rooms or buildings.

BGGRK is a set of GNSS repeater kit for Re-radiating GNSS antenna.

【Typical Application】

• For GPS/GNSS products testing

* For testing the cell‐ phone with GPS, PND, car navigators, tracker, survey products, etc.

• For the purpose of GPS signal covering

* Car parks, lab, aviation manufacturing hangar, trade shows, Emergency‐, safety vehicles, public transportation etc.

【Technical Parameters】

• GPS: L1&L2,
• GLONASS: G1&G2
• Beidou2:B1,B2,B3;
• This is single point solution, covers 5-20 meters at radius(by increasing the amplifier according to methods and under field conditions, building height and other certain conditions reach a radius of 20 meters).
• Note: Single point means one antenna be used to transmit GPS/GLONASS/Beidou2 signal.

【Standard Configurations】

• Gain Controller:GA30V,1 ea;
• Receiving Antenna: BGG39,1 ea;
• Cable Assembly:RG8,30M, 1ea;
• Cable Assembly:KSR240,10M,1 ea;
• Sending Antenna:GRA10,1 ea.
• Ligtingprotector:1 ea;

【system structure (Under standard configuration)】

【System Schematic】

1. GPS/GLONASS/Beidou2 Antenna(BGG39) be installed on roof of the building;
2. Cable assembly RG8 fixed along the out wall, one terminator connects BGG39,the another to protector at the appropriate place.       In some special environment, select PE or PVC material plastic pipe to protect the cable assembly is quite   sensible;
3. Protector and Gain controller are fixed on the wall indoor;
4. Cable assembly KSR240 is fixed along the ceiling of the operating place;
5. Antenna GRA10 be fixed on the ceiling .
According to the actual environment, you can adjust positions of some parts, which can make you theadjust, change and overhaul    more easily.