RF Over Fiber Module GOM25
Classification:
Product
RF Over Fiber Systems
RF Over Fiber Modules
-
File size: 469.6KB
- Description
- Videos
- Download
- BUY NOW
-
Specifications:
Parameters
Conditions
Min.
Typ.
Max.
Units
Freq. Range
Input & Output
16
2800
MHz
In & Out Impedance
Input / Output
50
Ω
Input VSWR
2.0
Output VSWR
2.0
Gain
TX(7dBm) + RX(5dBm)
19
20
23
dB
Gain Flatness
16MHz~1000MHz
3
dB
1000MHz~2800MHz
3
Wavelength
TX
1550/1310
nm
RX
1260
1650
nm
TX&RX Operating Voltage
4.8
5
5.2
V
TX Operating Current
Without Bias-T
120
150
mA
With Bias-T
250
mA
RX Operating Current
180
200
mA
Max. RF Input Power
TX
10
dBm
Max. RF Output Power
RX
8
dBm
Max. Optical
Output Power
TX
7
dBm
RX Optical
Power Sensitivity
RX
-30
5
dBm
AGC Power
RX
-
-
-
-
RF Connector
SMA K
Fiber Optic Connector
FC/APC
SC/APC
Operating Temperature Range
TX,RX
-25
65
℃
Storage Temperature Range
TX,RX
-40
85
℃
Weight
Net Weight: TX or RX
30
g
Box+RX+TX
126
Box Dimension
140X190X40
mm
Pin Definitions:

TX No.
Definition
Note
1
VCC
Power supply pin +5V
2
GND
Power Ground Wire
3
NC
Please keep this pin suspended and do NOT make any connections
4
LED-
Negative terminal of indicator light
5
LED+
Positive terminal of indicator light
6
NC
Please keep this pin suspended and do NOT make any connections

RX No.
Definition
Note
1
VCC
Power supply pin +5V
2
GND
Power Ground Wire
3
NC
Please keep this pin suspended and do NOT make any connections
4
GLED-
Green Indicator Light
5
COM
Bicolor lamp anode
6
RLED-
Red Indicator Light
Product Dimension:
46x24x12.5 (mm)
Description:
GOM25 is a RFoF module operate between 45MHz to 2.5GHz, provide long distance RF signal transport over Single Mode Fiber. It is a RF over fiber system. This module is a photoelectric conversion device designed specifically for long-distance, high fidelity transmission of satellite system RF signals. Solved the core problems of short transmission distance, high loss, and susceptibility to electromagnetic interference in the transmission of high-frequency satellite signals, including Beidou, GPS, Glonass, Galeo and other satellite navigation frequency bands, using traditional coaxial cables. The system consists of a pair of modules, TX unit and RX unit, which transmit remote RF signals to receivers or time-frequency devices tens of kilometers away with low distortion and loss through single-mode optical fibers. It is a key component for achieving high-precision positioning, timing, and synchronization systems to operate stably and reliably in a distributed architecture.Product Characteristics:
1. Low Power Consumption
2. 5V Power Supply
3. The Total Gain(TX+RX): 20dB
4. Frequency Range: 16~2800MHZApplications:
1. GPS and GNSS Repeater Systems
2. Multi-Radio Interconnect
3. 5G testingOrder Informations and Available Options:
Part number
Description
Part number
Description
GOM25-TX
TX, 1550nm, FC/APC
GOM25-RX
RX, FC/APC
GOM25-TX-10
TX, 1310nm, FC/APC
GOM25-RX-01
RX, SC/APC
GOM25-TX-01
TX, 1550nm, SC/APC
GOM25-RX-L200
RX, With 200Ω load on coaxial port, FC/APC
GOM25-TX-11
TX, 1310nm, SC/APC
GOM25-RX-L200-01
RX, With 200Ω load on coaxial port, SC/APC
GOM25-TX-BT
TX, Pass DC 5V on Coaxial port, 1550nm, FC/APC
GOM25-TX-BT-10
TX,Pass DC 5V on Coaxial port, 1310nm, FC/APC
GOM25-TX-BT-01
TX, Pass DC 5V on Coaxial port,1550nm, SC/APC
GOM25-TX-BT-11
TX, Pass DC 5V on Coaxial port,1310nm, SC/APC
Test Data:Frequency(Mhz)
16
100
800
1000
1500
2000
2500
2800
VSWR
1.9
1.7
1.6
1.7
1.3
1.2
1.4
1.3
Gain(dB)
23
21
22
22
20
20
22
20
(16Mhz~1000Mhz)
(1000Mhz~2800Mhz)
RF Over Fiber Modules
RF Over Fiber
GPS over fiber
RFOF
Previous Page
Professional consultant
We provide you with 1 on 1 exclusive services
Related products
RF Over Fiber GPS Over Fiber Repeater Kit GOFRK-102
Full GNSS Band GPS Over Fiber Repeater Kit RGOFRK
GPS Over Fiber System TOS2xxx Serial
GPS Over Fiber System GOF Serial


