GPS/GNSS Digital Step Adjustable Amplifier RGA30-DV

√ Gain : 0~30dB, Digital display step adjustable . √ Serial command control. √ Digital gain: LED digital display step adjustable. √ Input and output port power settings. √ Frequency: 1164MHz~1616MHz

Classification:

Product

GPS and GNSS Amplifiers


+
  • RGA30-N.jpg
  • DESCRIPTION
  • Videos
  • Download
  • BUY NOW
  • Description

    RGA30 - DV is our latest rack-mounted single stage of the low noise amplifier, its technical characteristics are as follows.
    1. Digital display gain. LED digital display, clearly display the current amplifier gain.
    2. Gain:0-30dB, digital display step adjustable.
    3. Touch-tone gain adjustment: through the upper and lower key, you can adjust the gain when needed.
    4. Power control: toggle the power switch, easy control power supply state .
    5. Serial command control.
    6. Input and output port power setting.
    Cover GP, Galleo,and GLONASS Beldou 2 frequencies etc. The device fetures -30dB gain and a noise fgure less than 3dB.Since the product consumes less than 100mA,both the
    equipment and the receiving antenna are vertically mounted.

    【Technical Parameters】

    GPS Signal Indoor, Timing, Survey, Wireless Communication etc
    Gain : 0 - 30dB, Digital display step adjustable
    Serial command control.
    Response For
    *GPS:L1,L2,L2C,L5;
    *Glonass:G1,G2:
    *Galileo:L1,E1,E2,E5(E5a,E5b),E6
    *Beidou2:B1,B2,B3
    *IRNSS L1,L5;,
    *OmniStar

    Specifications

    Parameter

    Conditions

    Min

    Typ

    Max

    Units

    Freq. Range

    In- Output ports, 50Ω

    1150

     

    1650

    MHz

    In &Out Imped

    In, all output ports 

     

    50

     

    Ω

    Gain

    1207MHz

    1227MHz

    1561MHz

    1575MHz

    1609MHz

     

    In- Output ports

    -45dBm Input Level

     

    0~30

     

    dB

    (0~30)-1.5

    0~30

    (0~30)+1.5

    (0~30)-1.5

    0~30

    (0~30)+1.5

    (0~30)-1.5

    0~30

    (0~30)+1.5

    (0~30)-1

    0~30

    (0~30)+1

    (0~30)-1.5

    0~30

    (0~30)+1.5

    Input SWR

     

     

     

    2.5:1

    -

    Output SWR

     

     

     

    2.5:1

    -

    Noise Figure

     

     

     

    3

    dB

       Gain Flatness

     

     

     

    3

    dB

    Amp. Balance

     

     

     

    0.5

    dB

    Phase Balance

     

     

     

    1.0

    deg

    Group Delay Flatness

     

     

     

    1

    ns

    Current

    Pass DC, No Powered configuration, DC input on Out Port

     

     

    200

    mA

    Max RF Input

    Max RF input without damage

     

     

    0

    dBm

    Operating Temperature

     

    -40

     

    85

    pic  pic pic  pic pic pic pic pic   

Keyword:

GNSS Amplifier

GPS amplifier

Professional consultant

We provide you with 1 on 1 exclusive services

contact

Related products

Programmable GNSS Amplified Splitter GA30-PV4

√ Military grade working temperature -55°~85° (core device operating temperature: -55°~125°) √ Adjustable gain range: 0~30dB; Stepping: 1dB √ Operating frequency range:1150MHz ~1650MHz √ Output voltage at IN: 5V √ Connector mode: TNC-K, N, SMA √ Program control mode: 485 protocol interface

GPS Amplifiers GPS&GNSS In-Line Amplifier GA40

√ Full GNSS band:GPS/GLONASS/Beidou/Galileo/IRNSS/QZSS/SBAS/NAVIC; √ Frequency Range:1150~1650MHz; √ Gain(amplified):10dB ~ 40dB(be Specified); √ Pass DC(Standard); √ High Isolation: >30dB; √ Extra Low Noise Figure: <1.5dB

GPSIGNSS Adjustable Amplifier GA30-V

√ Full GNSS band:GPS/GLONASS/Beidou/Galileo/IRNSS/QZSS/SBAS/NAVIC; √ Frequency Range:1164~1616MHz; √ Gain:0dB ~ 30dB adjustable; √ Pass DC In & Out(Standard); √ Low Noise Figure: <2.5dB; √ 12V DC Power Adaptor(Standard);

GA30-DV GPS digital step adjustable amplifier

√ Gain : 0~30dB, Digital display step adjustable . √ Frequency Range: 1150MHz~1650MHz √ Program control RS232 √ Pass DC and block DC switchable. √ Response For:GPS/Glonass/Galileo/Beidou2/IRNSS/OmniStar

Online Message

Submit Message